EXTERNAL Surface Revival - PH Boosted
Description
A powerful cleaner and degreaser. External Surface Revival pH Boosted is a non-corrosive formulation that will clean almost any surface free of general build-up, dirt, mould, oil and grease on hard surfaces and engine parts. Removes mould, moss and returns weather affected surfaces to original condition when used regularly. External Surface Revival pH Boosted is not harmful to the environment, it is caustic & Chlorine free and not susceptible to cause burns and provides residue protection. Ideal for commercial building exteriors, retaining walls, house exteriors, public toilet areas, bathroom areas, boat decks, outside dining areas, pool area, paths, driveways and timber decking. External Surface Revival is also AQIS approved for safe use in food cool rooms and for roof tiles.
• Biodegradable
• No bleach or chlorine
• No phosphates
• Non toxic
• Non polluting
• Australian quarantine and inspection
service approved (AQIS)
• Meets TGA’s requirements for therapeutic goods order
no. 54 Standard for disinfectants and sterilants
• Low water consumption (spray and wipe approach in
most cases)
• Meets U.S. EPA standards
• No bleach
• Non flammable
• Non corrosive
• Non hazardous under EC regulations
• Non aerosol
How to Use
Method
In a clean bucket dilute 1 part External Surface Revival
pH Boosted to 4 parts water.
1. Scrub surface with a broom or brush.
2. Leave for 5-10 minutes.
3. Rinse with water. Repeat steps if necessary.
Note: Where possible rinse with pressure hose.
4. This product may be diluted further for light cleaning.
Note: SoSafeTM recommends that after treatment, walls
should be coated with SoSafeTM Safety Shield to protect
against future weather damage.
A powerful cleaner and degreaser. External Surface Revival pH Boosted is a non-corrosive formulation that will clean almost any surface free of general build-up, dirt, mould, oil and grease on hard surfaces and engine parts. Removes mould, moss and returns weather affected surfaces to original condition when used regularly. External Surface Revival pH Boosted is not harmful to the environment, it is caustic & Chlorine free and not susceptible to cause burns and provides residue protection. Ideal for commercial building exteriors, retaining walls, house exteriors, public toilet areas, bathroom areas, boat decks, outside dining areas, pool area, paths, driveways and timber decking. External Surface Revival is also AQIS approved for safe use in food cool rooms and for roof tiles.
• Biodegradable
• No bleach or chlorine
• No phosphates
• Non toxic
• Non polluting
• Australian quarantine and inspection
service approved (AQIS)
• Meets TGA’s requirements for therapeutic goods order
no. 54 Standard for disinfectants and sterilants
• Low water consumption (spray and wipe approach in
most cases)
• Meets U.S. EPA standards
• No bleach
• Non flammable
• Non corrosive
• Non hazardous under EC regulations
• Non aerosol
How to Use
Method
In a clean bucket dilute 1 part External Surface Revival
pH Boosted to 4 parts water.
1. Scrub surface with a broom or brush.
2. Leave for 5-10 minutes.
3. Rinse with water. Repeat steps if necessary.
Note: Where possible rinse with pressure hose.
4. This product may be diluted further for light cleaning.
Note: SoSafeTM recommends that after treatment, walls
should be coated with SoSafeTM Safety Shield to protect
against future weather damage.